28002 - Jet-Lube MP-50 1/2 lb Brushtop Can

Moly Paste

MP-50 is a non-melting, lubricating compound containing a high percentage of low-friction molybdenum disulfide (MoS2). Being a thick paste, it can be applied by brush or spatula. MP-50 has a performance range of -300°F (-185°C) to 750°F (400°C) for anti-seize applications. When employed in mechanical components not exposed to air, good lubrication results can be anticipated up to 2000°F (1090°C). Molybdenum Disulfide is nearly inert in operating conditions up to 600°F (315°C). If the grease vehicle should be squeezed out, disrupting normal lubrication, the moly disulfide remains to protect working surfaces. It assists in boundary lubrication by filling microscopic voids. MP-50 “plates” metal surfaces, reducing high points and increasing the load carrying area. It provides a low-friction shield to reduce bearing temperatures, protect working parts, prevent galling, seizure, stick-slip and heat-freeze. MP-50 adheres tenaciously to metal surfaces.

MP-50 may be applied directly to hot surfaces without running off or dripping. Conversely, it may be applied at temperatures as low as 0°F (-18°C). MP-50 is water resistant, withstands extreme weather elements, and helps prevent corrosion on parts exposed to water, steam, most acids and alkalis.

Benefits:

• Non-melting
• High-Temp >750°F (400°C)
• Prevents corrosion
• Water Resistant
• Contains high percentage MoS2
• Prevents Stick-Slip
• Lowers Friction

Specifications:

Base Materials: Organo Clay & MoS2 / Petroleum
Friction / Nut-Factor: (Nut-Factor) - 0.105 - High Chrome Alloys @ 60,000 PSI Contact Stress
Service Rating: -300°F to 750°F, -185°C to 400°C