Millguard Medium Drum Greases

MillGuard Gold is a high-viscosity lubricating fluid with extreme pressure properties for high load applications. It has extraordinary adhesiveness and wear resistance. It was developed primarily for use on open gears and heavily loaded bushings.

MillGuard Gold is suitable for use on the most severely loaded open gears, such as sugar mills, ball mills, and cement kilns. The high level of extreme pressure additives prevents the scuffing, pitting, and plastic deformation of metal surfaces that can occur on open gears.

On mill and kiln open gears, MillGuard Gold can be applied using either an automatic lubrication system or a sump system, where an oiler wheel drags through the lubricant and deposits it on the pinion. When using a Lincoln or Farval system, the temperature of the product should be kept above 50°F (10°C).

Some open gears are lubricated daily by hand and MillGuard Gold can be applied this way. The consistency of the fluid minimizes splashing during application and the product readily forms a coating on the pinion and bull gear. In many cases the interval between applications can be extended.

BENEFITS:

• REDUCED COST OF LUBRICANT – low consumption.
• REDUCED COST OF MAINTENANCE – extreme pressure additives, plus special lubricating solids reduce wear and extend equipment life.
• EASY CLEAN-UP – clean to work with. Does not harden.
• SAFE TO USE – contains no hazardous materials or materials under suspicion of being hazardous.

APPLICATIONS:

Use MillGuard Gold on the open gears and bushings of sugar mills and on the open gears of ball mills, kilns, and dryers. It can be used on wire ropes and is especially useful where ropes are exposed to water. It extends the life of the ropes, sheaves (pulleys), and drum lagging.

Size and Type Container: Drum

Weight: 461 LBS.