DWT123 - Jet-Lube 10'' Steel Assembly Wire-Hog Casing Brush
- Availability: In Stock
- Product Sku: DWT123
Well Casing & Pipe Cleaning Brush
WireHog wire brushing and removal of this debris will allow chemistry to more easily move into the aquifer, require less chemistry and reduce the length on the job site significantly.
Benefits of using WireHog
- Rugged construction
- Sizes available to fit most well bores
- Brush designs for steel or PVC pipes
WireHog Brushes Sell Sheets (English) PDS
JET-LUBE - WIREHOG Well Casing Brushes by Design Water
10" ID casing, 10" PS screen, 12" telescope screen. Brushes for well casing & pipe cleaning
In wells, as much as 95% of debris created by biofouling (slime bacteria/iron bacteria) and 30-50% of mineral deposits may be on the inside of the well casing, screen or open bore hole. Wire brushing and removal of this debris will allow chemistry to more easily move into the aquifer, require less chemistry, and reduce the length on the job site significantly.
3-10" DIAMETER BRUSHES. All have a 1.25" female coupling with FIP threads. Three air holes drilled in the fitting allow you to airlift debris without tripping out of the well. Use poly brushes for PVC casing and screen. Poly brushes can be used in steel pipe but will wear the brush. Use steel brushes for steel casing and screen. Do NOT use steel brushes in PVC as will etch the casing. Connect the fitting to 1.25" steel pipe for weight. Brush up/down in 20’ increments to the bottom of the well. You can brush and airlift simultaneously, if needed. At the bottom of the well, connect the pipe at the surface to your air-compressor and blow debris out of the well. If not enough submergence for airlifting, bail debris from the bottom of the well. Use the Unicid chemistry for cleaning the well to remove iron bacteria or mineral deposits.