{"title":"ProAction Fluids","description":null,"products":[{"product_id":"proaction-fluids-provis-xp-gel-strength-and-filtration-booster-case-of-8-ez-bags","title":"ProAction Fluids ProVis XP Gel Strength and Filtration Booster - Case of 8 EZ Bags","description":"\u003cp\u003eProVis XP is a biopolymer blend that modifies gel strength and filtration control with minimal increase in overall fluid system viscosity. In most cases, 5–lbs of ProVis XP added to 100-lbs (~2%w\/w) bentonite can extend the performance of the system to outperform fluid mixes with much higher loadings of bentonite alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING \u0026amp; APPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProVis XP should be used to boost the properties of bentonite in high density soils where ProVis series or bentonite products are preferred to ProBore series products. It is especially effective in scenarios where carrying capacity and gel strength need to be increased without a large change in fluid system viscosity. Excessive fluid system viscosity can lead to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh annular pressures (which lead to frac outs)\u003c\/li\u003e\n\u003cli\u003eDecreased pump efficiency\u003c\/li\u003e\n\u003cli\u003eIncreased rotational and pull pressures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMixes per 500 Gallons\u003c\/p\u003e\n\u003cp\u003eStart with makeup water pH ranging from 8.5-9.5\u003c\/p\u003e\n\u003cp\u003eUse ProAction’s pH Boost to modulate water pH\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSandy, Gravel, Cobble, Rock or otherwise unknown high-density condtions:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e2-3 Bags ProVis HYB + 1 EZB ProVis XP\u003c\/p\u003e\n\u003cp\u003eHydration time will vary depending on mix pump output, tank size and water quality, but is generally 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProVis XP is packaged into pre-dosed 5-lb EZBs (EZ Bags). 8 EZBs per case.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProVis-XP-Product-Data-Sheet.pdf?v=1777476821\" title=\"ProVis-XP-Product-Data-Sheet\"\u003eProVis XP Product Data Sheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProVis-XP_US_US_EN_1.1.pdf?v=1777476821\" title=\"ProVis-XP SDS\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54055095763249,"sku":"5318-8","price":360.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-ProVis-XP-Gel-Strength-and-Filtration-Booster_1.jpg?v=1777476972"},{"product_id":"proaction-fluids-ph-boost-chlorine-neutralizer-and-ph-booster","title":"ProAction Fluids pH Boost Chlorine Neutralizer and pH Booster","description":"\u003cp\u003eWater is often times greater than 96% of a fluid system. Our advice? Boost it, then mix it. Using pH Boost will improve the properties of makeup water by adjusting the pH and tying up harness minerals. Managing both of those qualities will improve the overall performance of your drilling fluid system.\u003c\/p\u003e\n\u003cp\u003eAdvantages of using pH Boost:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjusts the pH of your makeup water (the ideal pH range is 8.5-9.5)\u003c\/li\u003e\n\u003cli\u003eEnables better performance from bentonite and specialty additives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDOSAGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd 0.5-1.0 lb. per 100 gallons of water with the tank agitating. Can be added via venturi or through the top of tank\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e5 lb. resealable EZB or 5-gallon bucket (40 lbs.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/pHBoost-TDS-1.pdf?v=1777477821\" title=\"pHBoost-TDS\"\u003epH Boost TDS\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/pH-Boost_US_US_EN_1.0-1.pdf?v=1777477822\" title=\"pH-Boost SDS\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 8 EZ Bags","offer_id":54055135936817,"sku":"5319-8","price":62.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54055135969585,"sku":"5319-5","price":51.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-pH-Boost-Chlorine-Neutralizer-and-pH-Booster_1.jpg?v=1777477914"},{"product_id":"proaction-fluids-antifoam-air-drilling-consistent-foam-5-gallon-bucket","title":"ProAction Fluids AntiFoam Air Drilling Consistent Foam - 5 Gallon  Bucket","description":"\u003cp\u003eProAction Fluids AntiFoam Air Drilling Consistent Foam - 5 Gallon Bucket\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54055200620849,"sku":"3603-5","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/proaction-fluids_1.jpg?v=1777479219"},{"product_id":"proaction-fluids-drillclean-tank-tooling-and-equipment-cleaner-and-sanitizer-case-of-20-ez-bags","title":"ProAction Fluids DrillClean Tank, Tooling, and Equipment Cleaner and Sanitizer - Case of 20 EZ Bags","description":"\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003eDrillClean is a proprietary blend of environmentally friendly granules used to rapidly penetrate and breakdown dirt, clays, organic matter, clumps of partially-hydrated bentonite and\/or coagulated bentonite-polymer mixtures. DrillClean is safe to use for cleaning out or preventing the fouling of tanks, and can be used on a variety of exterior surfaces as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-2 EZ Bags treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eDrillClean will need to be hydrated in water prior to use, whether in the mixing system tank or a separate reservoir.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTO CLEAN TANKS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Add 2-4 EZ Bags of DrillClean to tank with enough water to circulate entire system.\u003cbr\u003e2. Circulate DrillClean mixture through the system for about 10 minutes or until surfaces are free of debris. Opening all jet-lines and recirculating lines is recommended to remove any build-up of debris and prevent trapping any stagnant water in the flow lines.\u003cbr\u003e3. Drain and Rinse tank before reuse if you are using bentonite-based mud. Drain tank and refill for use immediately if you are using ProAction Fluids mud additives\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTO PREVENT FOULING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the last batch of the day, add 1 EZ Bag to the mud system while circulating. While this can be done anytime, using the last batch allows the treatment to stay in the system overnight for maximum effectiveness.\u003c\/p\u003e\n\u003cp\u003eThis can be done weekly, bi-weekly or as desired to help keep your system clean.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAS A PRESERVATIVE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHelps prevent fouling if a water tank or mud-mix is going to sit without agitation for more than 12 hours\u003c\/p\u003e\n\u003cp\u003e1. Add 1-2 EZ bags to your tank and circulate for 1-5 minutes before shutting down\u003cbr\u003e2. This treatment should prevent fouling for several days depending on conditions\u003cbr\u003e3. When you are ready to resume drilling, recheck mud properties. PAF products can be added on-top of DrillClean treated water if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTO TREAT FOULED TANKS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor situations when you are unable to purge and clean with DrillClean\u003c\/p\u003e\n\u003cp\u003e1. Add 2-4 EZ bags to fouled tank and circulate for 20 minutes to 2 hours or until water is cleared up and foulants are neutralized\u003cbr\u003e2. Reuse the water by adding approximately 1.5X the normal PAF mix dosage to the batch using the DrillClean treated water\u003cbr\u003e3. Checking the properties of the PAF mix in a small batch (pitcher or jar) prior to putting new additives into the tank is strongly recommended\u003cbr\u003e4. Continue to add 1 EZ Bag of DrillClean to the next batch or two when using the cleaned DrillClean water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/DrillClean-Product-and-Mixing-v1.2-6.pdf?v=1777479843\" title=\"DrillClean-Product-and-Mixing\"\u003eDrillClean Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/DrillClean_US_US_EN_1.0.pdf?v=1777479843\" title=\"DrillClean\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54055232373041,"sku":"5316-20","price":82.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-DrillClean-Tank-Tooling-and-Equipment-Cleaner-and-Sanitizer_1.jpg?v=1777479973"},{"product_id":"proaction-fluids-profoam-air-drilling-consistent-foam-5-gallon-bucket","title":"ProAction Fluids ProFoam Air Drilling Consistent Foam - 5 Gallon  Bucket","description":"\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-209e1757 elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"209e1757\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003e\u003cstrong style=\"font-size: inherit;\"\u003eProFoam is designed for air drilling\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-211e515 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"211e515\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduces stable, consistent foam in all types of water\u003c\/li\u003e\n\u003cli\u003eImproves hole cleaning and penetration rates\u003c\/li\u003e\n\u003cli\u003eExcellent carrying capacity and retention times\u003c\/li\u003e\n\u003cli\u003eSuitable for use with downhole hammers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-12993cc0 elementor-widget-divider--view-line elementor-widget elementor-widget-divider ce-animation-start\" data-id=\"12993cc0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-divider\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-514f405b elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"514f405b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh flash point\u003c\/li\u003e\n\u003cli\u003eLow freezing point\u003c\/li\u003e\n\u003cli\u003eStable foam\u003c\/li\u003e\n\u003cli\u003eReadily biodegradable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePROPERTIES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAppearance @ 25C: Light amber-clear liquid\u003c\/li\u003e\n\u003cli\u003epH (as is): 7.5\u003c\/li\u003e\n\u003cli\u003eViscosity (cps @ 25C): 800 max\u003c\/li\u003e\n\u003cli\u003eFoam Height (mm@1% active, 25C, initial\/5min): 145\/110\u003c\/li\u003e\n\u003cli\u003eLiquid Density (lbs\/gal @ 25C): 8.9\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-2152b24 elementor-widget-divider--view-line elementor-widget elementor-widget-divider ce-animation-start\" data-id=\"2152b24\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-divider\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-539c5e5c elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"539c5e5c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProFoam can be used with either GeoSweep HD or ProDrill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen used with GeoSweep HD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor every 500 gallons of water, use 2-3 pounds of GeoSweep HD fol-lowed by 2-3 gallons of ProFoam\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen used with ProDrill:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor every 500 gallons of water, use 1 – 1 ½ gallons of ProDrill followed by 2-3 gallons of ProFoam\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProFoam-DataMixing-1-1.pdf?v=1777480325\" title=\"ProFoam-DataMixing\"\u003eProFoam Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProFoam-HDD_US_US_EN_1.0.pdf?v=1777480321\" title=\"ProFoam-HDD\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54055262355761,"sku":"5313-5","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-ProFoam-Air-Drilling-Consistent-Foam_1.jpg?v=1777480484"},{"product_id":"proaction-fluids-vacboost-water-based-carrier-fluid","title":"ProAction Fluids VacBoost Water-Based Carrier Fluid","description":"\u003cdiv class=\"elementor-element elementor-element-1e4b8050 elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"1e4b8050\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eVacBoost is a proprietary water-based blend of clay inhibitors and surfactants that prevent clay and other soils with sticking tendencies from building up on surfaces in Hydro-excavator tanks or lines. VacBoost is a great solution to performance losses attributed to cuttings\/material buildup in tubes or tanks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-8f0d101 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"8f0d101\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater-based carrier fluid\u003c\/li\u003e\n\u003cli\u003ePrevents loss of suction in hoses\u003c\/li\u003e\n\u003cli\u003eReduces dumping time by preventing soil from sticking to the interior of spoils tanks\u003c\/li\u003e\n\u003cli\u003eNon-foaming, eco-friendly formula\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I use VacBoost?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVacBoost should be utilized when hydro-vac operations encounter sticky or reactive soils to prevent sticky and reactive clays from negatively affecting the performance of a hydro-vac or hydro-excavator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill VacBoost freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. VacBoost “slushes” at 16 degrees and can freeze solid at temperatures below 10 degrees.  It will thaw back out and is still usable, even if it does freeze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes VacBoost have any oil or hydrocarbons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. VacBoost is blended with a water-based carrier and uses components that are GRAS (Generally Regarded as Safe).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 EZ Bottle treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eVacBoost is water-based, and disperses and mixes very easily. The normal 1\/2-gallon EZ Bottle treats 500 gallons, but the full container can be utilized in smaller water tanks with no consequence of over-treating. VacBoost does not add any viscosity or rheological properties to the water and does not sheen or foam.\u003c\/p\u003e\n\u003cp\u003eIf starting with an empty tank:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill the tank with water to roughly half of desired capacity\u003c\/li\u003e\n\u003cli\u003eAdd VacBoost to the freshwater tank. The energy of the water filling the tank will be sufficient for agitation and mixing of the product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf adding into a tank already filled to target capacity:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAdd VacBoost to the freshwater tank\u003c\/li\u003e\n\u003cli\u003eUtilize a cutting wand to agitate the tank to mix the fluid\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/VacBoost-Product-and-Mixing-v1.2.pub.pdf?v=1777481177\" title=\"VacBoost-Product-and-Mixing\"\u003eVacBoost Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/VacBoost_US_US_EN_1.3.pdf?v=1777481177\" title=\"VacBoost\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 10 EZ Bottles","offer_id":54055314096433,"sku":"5370-10-RB","price":85.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54055314129201,"sku":"5370-5","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-VacBoost-Water-Based-Carrier-Fluid_1.jpg?v=1777481365"},{"product_id":"proaction-fluids-rodlube-lubricant-for-tooling-rods-and-other-wearable-items","title":"ProAction Fluids RodLube Lubricant for Tooling, Rods, and Other Wearable Items","description":"\u003cdiv class=\"elementor-element elementor-element-1e4b8050 elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"1e4b8050\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-3949274f elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"3949274f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eRodLube is used to keep tooling, rods, and other wearable items utilized in horizontal drilling operations lubricated. Providing lubrication for rotating and\/or moving parts can lead to improved ROP (Rate of Penetration), longer tooling\/bit life, and increased machine efficiency. RodLube is environmentally friendly, and can be utilized in both bentonite and polymeric based blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-58d4a8fd elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"58d4a8fd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING \u0026amp; APPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRodLube should be the last additive mixed into a tank of drilling fluid. RodLube has a high affinity for metals, and even at low treatment dosages will be an effective lubricant. Providing lubrication in drilling operations can have multiple benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved drilling efficiency\u003c\/li\u003e\n\u003cli\u003eRotational and directional torque reduction\u003c\/li\u003e\n\u003cli\u003eExtension of tooling and bit life\u003c\/li\u003e\n\u003cli\u003eIncreased ROPs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMixes per 500 Gallons\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStarting Point recommended to be 0.5 gallons (1 EZ Bag or Bottle) per 500 gallons\u003c\/li\u003e\n\u003cli\u003eDosage can be increased up to 1-1.5% of the fluid system if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRodLube is packaged into either pre-dosed 1\/2 gallon EZBs (EZ Bags or Bottles—10 per case), 5 gallon bucket\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/RodLube-PDS-1.pdf?v=1777483808\" title=\"RodLube-PDS\"\u003eProduct Data Sheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/RodLube_US_US_EN_1.2.pdf?v=1777483808\" title=\"RodLube\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-8f0d101 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"8f0d101\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 10 EZ Bottles","offer_id":54055366099249,"sku":"5324-10-RB","price":148.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54055366132017,"sku":"5324-5","price":148.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-RodLube-Lubricant_1.jpg?v=1777484260"},{"product_id":"proaction-fluids-boreshield-gel-strength-and-filtration-control-additive-case-of-10-ez-bottles","title":"ProAction Fluids BoreShield Gel Strength and Filtration Control Additive - Case of 10 EZ Bottles","description":"\u003cdiv class=\"elementor-element elementor-element-38caf62a elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"38caf62a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eBoreShield is specialty slurry of biopolymers used to modify the filtration and carrying capacity of fluid systems. BoreShield is best applied in high-density\/high permeability soils, and can extenuate the performance of bentonite-based muds, or be used in “stand-alone” applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-61d43b49 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"61d43b49\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eQuick Dispersion and Hydration\u003c\/li\u003e\n\u003cli\u003eIncreases gel strength of fluid system\u003c\/li\u003e\n\u003cli\u003eCan be used as stand-alone product or with ProVis HYB (or other bentonite products)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-73adc8db elementor-widget-divider--view-line elementor-widget elementor-widget-divider ce-animation-start\" data-id=\"73adc8db\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-divider\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-27fc8063 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"27fc8063\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs BoreShield only for sand?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoreShield’s target soil conditions are sand, rock, and gravel. However, it can stabilize any loose or high density soils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs BoreShield just for Bentonite mixes?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoreShield, with the addition of ProDrill, is an effective base fluid in some drilling scenarios (usually smaller diameter projects). In that case, it can utilized with all ProBore series products and is completely compatible. BoreShield is also a good rheology modifier for bentonite-based mixes, and will help to increase filtration control and gel strength of ProVis HYB (or other) bentonite mixes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill BoreShield freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoreShield, like most suspensions, will get more viscous as the temperatures get colder. It is not water-based, and will not freeze.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1-4 EZ Bottle treats 500 gallons (application dependent)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoreShield can be used either as an additive to bentonite-based or polymeric muds. When utilizing with ProVis HYB or other bentonite products, 1-2 EZB’s of BoreShield should be added once the bentonite is hydrated\/fully yielded. If using as a component in a polymeric system (for example, in conjunction with ProAction’s ProBore series products), 2-4 EZB’s of BoreShield should be hydrated after ProDyne; but before any other polymers (ProDrill for example).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf starting with an empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Fill tank with water to desired capacity (if not full, at least 1\/2 of tank\u003cbr\u003ecapacity)\u003cbr\u003e2. Add BoreShield through the top of the tank, or through venturi hopper\u003cbr\u003e3. Mix tank for 5 minutes to ensure full hydration\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf adding into a tank already filled to target capacity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Tank fluid must be moving either via pump or mixing jets\u003cbr\u003e2. Add BoreShield through the top of the tank\u003cbr\u003e3. Mix tank for 5 minutes to ensure full hydration\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/BoreShield-Product-and-Mixing-v1.0.pdf?v=1777485223\" title=\"BoreShield-Product-and-Mixing\"\u003eBoreshield Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/BoreShield_US_US_EN_1.0.pdf?v=1777485222\" title=\"BoreShield\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54055392575793,"sku":"5308-10-RB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-BoreShield-Gel-Strength-and-Filtration-Control-Additive_1.jpg?v=1777485765"},{"product_id":"proaction-fluids-geosweep-lq-viscosifier-lubricant-and-filtration-control-additive","title":"ProAction Fluids GeoSweep LQ Viscosifier, Lubricant, and Filtration Control Additive","description":"\u003cdiv class=\"elementor-element elementor-element-3baec0f6 elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"3baec0f6\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eGeoSweep LQ is comprised of the same active chemistry as GeoSweep HD, but blended into a liquid slurry for quick dispersion and rapid hydration. An all-in-one viscosifier, lubricant, and friction reducer alternative for high density and high permeability conditions ranging from sand to rock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-c6a85dd elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"c6a85dd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003eGeoSweep LQ is a high molecular weight, multi-polymer slurry. It is an all-in-one viscosifier, lubricant and friction reducer alternative for high density-high permeability conditions ranging from sand to rock. GeoSweep LQ is comprised of the same active chemistry as GeoSweep HD, but blended into a liquid slurry for quick dispersion and rapid hydration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-73f1f486 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"73f1f486\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDecreased thrust and rotational forces because the slick nature of GeoSweep LQ reduces the  friction created between the bore wall and pipe\u003c\/li\u003e\n\u003cli\u003eHigh Cuttings Content from unique suspension properties and high gel strength that allow it to float and carry high density cuttings, such as coarse sand and gravel, out of the hole\u003c\/li\u003e\n\u003cli\u003eFiltration Control The specific blend of GeoSweep LQ allows the polymers to create a cake along the bore wall with a hydraulic seal, keeping fluid in the hole and moving cuttings down the bore path\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-71552d1c elementor-widget-divider--view-line elementor-widget elementor-widget-divider ce-animation-start\" data-id=\"71552d1c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-divider\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-69e79beb elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"69e79beb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1-2 EZB treats 500 gallons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are 2 main ways to mix GeoSweep LQ. The first is to introduce it through the top of the tank quickly (full container emptied in less than 45 seconds); much like the method utilized for other ProBore Series products.The agitation in the tank and the shear of the pump will typically be sufficient to ensure full hydration in 5-8 minutes. Should the situation dictate the usage of a hopper, ensure the hopper is free of material and completely dry. Carefully pour down the throat, evacuating the desired loading in less than 45 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo Mix GeoSweep LQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor maximum performance, it is recommended the tank be rinsed of any bentonite-based products. The largest determining factor for full hydration is mix energy. Ensuring the system is operating efficiently will improve consistency of mixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdding GeoSweep LQ to empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill tank to 50% of capacity (or just above roll jets)\u003c\/li\u003e\n\u003cli\u003ePre-treat water with ProDyne\u003c\/li\u003e\n\u003cli\u003eSet Mixing System pump at full rpm with flow directed through roll jets\u003c\/li\u003e\n\u003cli\u003eAdd desired GeoSweep LQ loading in less than 45 seconds\u003c\/li\u003e\n\u003cli\u003eAllow tank to continue agitating via the rolls jets for 5-8 minutes to ensure full dispersion and hydration\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMore Pro Tips to Master Your Mix\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHow Fast? One 1-gal bottle should take 45 seconds to be emptied into the tank.\u003c\/li\u003e\n\u003cli\u003eHeavy batches (more than 1 EZ Bottle) per 500 gallon batches of GeoSweep LQ require mix systems with high output pumps. For best results, add the containers quickly one after another.\u003c\/li\u003e\n\u003cli\u003eHow Long? Full hydration typically occurs within 5-8 minutes. To confirm complete mixing, ensure there are no chunks or strings of polymer within the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-7fd37616 elementor-widget-divider--view-line elementor-widget elementor-widget-divider ce-animation-start\" data-id=\"7fd37616\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"divider.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-divider\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-40eab772 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"40eab772\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan GeoSweep LQ be combined with other ProAction Products?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Not only is GeoSweep LQ compatible with all other ProAction ProBore products, there are cases such as when drilling in dirty sand, the addition of other ProAction products will provide synergistic benefits. However, ProDrill, ProDyne, or ClayLock should be added prior to, or immediately after, the addition of GeoSweep LQ.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat soil conditions are best suited for GeoSweep LQ?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeoSweep LQ works best as a standalone product in heavy, dense soils such as sand, cobble, and rock. GeoSweep LQ’s unique and versatile properties make it a great option for clay and sand mixed soils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should GeoSweep LQ be used instead of a Bentonite-based mix?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeoSweep LQ is a polymer alternative to bentonite for high density soil conditions. While ProAction does not limit our products to a specific hole size, a safe starting point for polymer only mixes in high density soil conditions is hole sizes less than 10” and less than 500’ in total length. Should the hole size exceed those parameters and operators’ comfortability with the product, ProAction offers a full line of bentonite and additives.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/GeoSweep-LQ-Product-and-Mixing-v1.2.pdf?v=1777486708\" title=\"GeoSweep-LQ-Product-and-Mixing\"\u003eGeoSweep LQ Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProActionFluids-GeoSweep-LQ-SDS-230712.pdf?v=1777486707\" title=\"ProActionFluids-GeoSweep-LQ-SDS\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 5 1-gal EZ Bottles","offer_id":54055437762865,"sku":"5310-5-RB","price":238.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54055437795633,"sku":"5310-5","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-GeoSweep-LQ_1.jpg?v=1777486799"},{"product_id":"proaction-fluids-geosweep-hd-viscosifier-lubricant-and-filtration-control-additive-case-of-8-ez-bags","title":"ProAction Fluids GeoSweep HD Viscosifier, Lubricant, and Filtration Control Additive - Case of 8 EZ  Bags","description":"\u003cdiv class=\"elementor-element elementor-element-1af4f32f elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"1af4f32f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eGeoSweep HD is a high molecular weight, multi-polymer granule blend. It is an all-in-one viscosifier, lubricant, and friction reducer for high density-high permeability conditions ranging from sand to rock. GeoSweep HD’s patented granule coating helps eliminate dust and reduce clumping, while also aiding dispersion when mixing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-4beb712 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"4beb712\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDecreased thrust and rotational forces because the slick nature of GeoSweep HD reduces the friction created between the bore wall and pipe\u003c\/li\u003e\n\u003cli\u003eHigh Cuttings Content from unique suspension properties and high gel strength that allow it to float and carry high-density cuttings, such as coarse sand and gravel, out of the hole\u003c\/li\u003e\n\u003cli\u003eFiltration Control The specific blend of GeoSweep HD allows the polymers to create a cake along the bore wall with a hydraulic seal, keeping fluid in the hole and moving cuttings down the bore path\u003c\/li\u003e\n\u003cli\u003e100% Silica-Free Formulation the proprietary blend of polymer granules provides unique product characteristics without the addition of silica into the mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan GeoSweep HD be combined with other ProAction Products?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Not only is GeoSweep HD is compatible with all other ProAction products, there are cases such as when drilling in dirty sand, that the addition of other ProAction products will provide synergistic benefits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat soil conditions are best suited for GeoSweep HD?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeoSweep LQ works best as a standalone product in heavy, dense soils such as sand, cobble, and rock. GeoSweep LQ’s unique and versatile properties make it a great option for clay and sand-mixed soils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should GeoSweep HD be used instead of a Bentonite-based mix?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeoSweep HD is a polymer alternative to bentonite for high-density soil conditions. While ProAction does not limit its products to a specific hole size, a safe starting point for polymer only mixes in high density soil conditions is hole sizes less than 10” and less than 500’ in total length. Should the hole size exceed those parameters and the operators’ comfortability with the product, ProAction offers a full line of bentonite and additives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-2 EZB treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eProAction’s recommendation is to mix GeoSweep HD through the top of the tank, much like the other ProBore Series products. Should the situation dictate the usage of a hopper, ensure the hopper is free of material and completely dry. After product addition is complete, divert full flow to roll jets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo Mix GeoSweep HD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor maximum performance, it is recommended the tank be rinsed of any bentonite-based products. The largest determining factor for full hydration is mix energy. Ensuring the system is operating efficiently will improve consistency of mixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdding GeoSweep HD to an empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBegin to fill tank\u003c\/li\u003e\n\u003cli\u003eEnsure Pump is at full RPM\u003c\/li\u003e\n\u003cli\u003ePre-treat water with ProDyne\u003c\/li\u003e\n\u003cli\u003eAdd GeoSweep HD when volume is between 1\/2 to 3\/4 of the tank’s total capacity.\u003c\/li\u003e\n\u003cli\u003eRoll the tank and keep jets on allowing GeoSweep HD to mix and hydrate for 10 – 12 minutes after it is added\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional GeoSweep HD can be added to an already hydrated tank even after you have completed the initial mixing cycle. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixing time may need to be extended 12 – 15 minutes when adding additional GeoSweep HD to the original mix.\u003c\/li\u003e\n\u003cli\u003eLook carefully at the mix to confirm that the additional GeoSweep HD has been successfully blended. Continue mixing until little or no dark spots are present to ensure full hydration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore Pro Tips to Master Your Mix\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHow Fast? One 5-lb bag should take between 45-60 seconds to be emptied into the tank in traditional mix systems. Mix systems with less agitation might require a slower addition time. If more than 1 bag is desired, bags should be added back to back.\u003c\/li\u003e\n\u003cli\u003eHow Long? Full hydration will show little to no dark spots in the drilling fluid.\u003c\/li\u003e\n\u003cli\u003eAlready Full? Although ProAction recommends adding GeoSweep HD while the tank is being filled, it can be added to a full tank. For best results, recirculate the tank and add the desired dosage of GeoSweep HD where there is the most energy in the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/GeoSweep-HD-Product-and-Mixing-v1.2.pdf?v=1777547496\" title=\"GeoSweep-HD-Product-and-Mixing\"\u003eGeoSweep HD Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/GeoSweep-HD_US_US_EN_1.0.pdf?v=1777547496\" title=\"GeoSweep\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54066065932593,"sku":"5311-8","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-GeoSweep-HD.jpg?v=1777547626"},{"product_id":"proaction-fluids-turbobore-synthetic-polymer-hdd-fluid-case-of-5-1-gal-ez-bottles","title":"ProAction Fluids TurboBore Synthetic Polymer HDD Fluid - Case of 5 1-gal EZ  Bottles","description":"\u003cdiv class=\"elementor-element elementor-element-215d634a elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"215d634a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eTurboBore is a proprietary HDD fluid technology comprised of synthetic polymers that activate when introduced to water. TurboBore is best suited for sand and rocky soil, and the rheology of TurboBore can match or exceed traditional bentonite\/bentonite with additives mixes at up to an 85% reduction in material weight - significantly decreasing freight costs, improving warehouse efficiency, and providing HSE uplifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-51143cc0 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"51143cc0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Product Formulation \u003c\/strong\u003emeans no recipes or other additives needed; one product does it all\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuttings Fluidization \u003c\/strong\u003eleads to lower torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Concentration Debris Removal \u003c\/strong\u003eis aided by the unique high gel strength\/yield point properties of the fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective Filtration Control \u003c\/strong\u003ecreated by the polymer matrix interacting with the bore wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it normal for the fluid\/returns to look light with bubbles present?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The interaction between the polymer blend being exposed to air naturally present in the soil creates a structural, activated fluid that might appear to be “light”, but in reality has properties that match or even exceed traditional bentonite mixes.\u003cstrong\u003e  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill TurboBore freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. TurboBore contains a biodegradable oil that will become viscous when cold, but will not freeze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between TurboBore and other ProAction (or competitor’s) polymer products?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot all polymers are created equal. ProAction offers several viscosifying, polymeric based products such as ProDrill, GeoSweep HD \/LQ, and BoreShield. The low-end rheology to dose ratio for TurboBore is 2-3 times higher than these (and other products that claim similar properties). Even quadrupling the dosage of ProDrill (2-gallons per 500-gallons) will still result in carrying capacity and filtration control less than that of TurboBore.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 to 1.5+ EZ Bottles treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eThe all liquid, rapid dispersion blend of TurboBore mixes easily and quickly. The best method to introduce TurboBore to a mix system is through the top of the tank, or through a suction-type manifold. The instantaneous viscosity once the product begins to hydrate can lower the pressure drop needed for a venturi to operate effectively, which will make TurboBore extremely difficult to introduce via venturi hopper. It is not uncommon for there to be “light” fluid present in the tank; with the amount proportional to product dosage and mixing energy. Continued “heavy” loadings (greater than 1.5 gallons per tank) can result in un-hydrated polymer being present in the system; it is critical to monitor your tank to ensure consistent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo Mix TurboBore:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor maximum performance, it is recommended the tank be rinsed of any bentonite-based products. The largest determining factor for full hydration is mixing energy. Ensuring the system is operating efficiently will improve consistency of mixing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdding TurboBore to empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill tank to 50% of capacity (or just above roll jets)\u003c\/li\u003e\n\u003cli\u003eSet Mixing System pump at full rpm with flow directed through roll jets\u003c\/li\u003e\n\u003cli\u003eAdd desired TurboBore loading through the top of the tank as the it is filled with the remaining balance of water\u003c\/li\u003e\n\u003cli\u003eAllow tank to continue agitating via the rolls jets for 5-8 minutes to ensure full dispersion and hydration\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAdding TurboBore to empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSet Mixing System pump at full rpm with flow directed through roll jets\u003c\/li\u003e\n\u003cli\u003eAdd desired TurboBore loading through the top of the tank\u003c\/li\u003e\n\u003cli\u003eAllow tank to continue agitating via the rolls jets for 5-8 minutes to ensure full dispersion and hydration\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/TurboBore-DataMixing.pdf?v=1777548386\" title=\"TurboBore-DataMixing\"\u003eTurboBore Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/TurboBore_US_US_EN_1.0.pdf?v=1777548385\" title=\"TurboBore\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ProAction Fluids","offers":[{"title":"Default Title","offer_id":54066104762673,"sku":"5327-5-RB","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-TurboBore-Synthetic-Polymer-HDD-Fluid.jpg?v=1777548502"},{"product_id":"proaction-fluids-claylock-clay-control-additive","title":"ProAction Fluids ClayLock Clay Control Additive","description":"\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eClayLock is a proprietary clay inhibitor blend used to prevent reactive clays from swelling. ClayLock binds and encapsulates clay platelets together and prevents water intrusion between the platelets - the root cause of clay swelling. It can be added to your water in a variety of ways, and the water-based formulation requires a fraction of the mixing energy required for other clay swelling prevention products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdditive to combat swelling\/reactive clays\u003c\/li\u003e\n\u003cli\u003ePrevents clay deconsolidation\u003c\/li\u003e\n\u003cli\u003eReduces torque by keeping pipe\/tooling free from the “grabbing effect” of reactive clays\u003c\/li\u003e\n\u003cli\u003eCan be used in conjunction with ProAction’s ProBore or ProVis series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the color of ClayLock have any bearing on the performance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. There is a slight natural variation in the feedstock\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use ClayLock and ProDyne in the same mud blend? \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, ProDyne and ClayLock are compatible with each other and can be used in the same mud mix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill ClayLock freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClayLock will turn to slush at temperatures below 20°F (-7°C). This does not affect the performance, and it will fully activate when introduced into a fluid system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan ClayLock be added to a bentonite-based mix?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! Ensure bentonite is fully dispersed and yielded prior to the addition of ClayLock to the fluid system. Improper addition of ClayLock, like all clay additives, will reduce the effectiveness of the bentonite. Clay inhibitors should always be added AFTER full hydration of the bentonite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1-2 EZBs (Bags or Bottles) treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eIt is possible to run a highly concentrated dose of ClayLock directly down the drill stem if reactive clays are unexpectedly encountered during a drilling operation. Upon breaking the joints between two rods, pour between a half to full EZB of ClayLock down the rod and circulate fluid to get concentrated exposure to the reactive clays quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf starting with an empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill the tank with water to roughly half of desired capacity\u003c\/li\u003e\n\u003cli\u003eAdd ClayLock through the top of the tank. The energy of the water filling the tank will be sufficient for agitation and mixing of the product.\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eIf adding into a tank already filled to target capacity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTank fluid must be moving either via pump or mixing jets\u003c\/li\u003e\n\u003cli\u003eAdd ClayLock through the top of the tank\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ClayLock-Product-and-Mixing-v1.2-1.pdf?v=1777549271\" title=\"ClayLock-Product-and-Mixing\"\u003eClayLock Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ClayLock_US_US_EN_1.0-1.pdf?v=1777549270\" title=\"ClayLock\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 10 EZ Bottles","offer_id":54066139988273,"sku":"5309-10-RB","price":87.5,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54066140021041,"sku":"5309-5","price":82.42,"currency_code":"USD","in_stock":false},{"title":"265 Gallon IBC Tote","offer_id":54066140053809,"sku":"5309-265","price":3732.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-ClayLock-Clay-Control-Additive.jpg?v=1777549409"},{"product_id":"proaction-fluids-prodyne-water-based-water-soluble-non-foaming-drilling-detergent-builder-and-water-conditioner-chelator","title":"ProAction Fluids ProDyne Water-Based, Water-Soluble Non-Foaming Drilling Detergent Builder and Water Conditioner \/ Chelator","description":"\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eProDyne is a water-based, water-soluble non-foaming drilling detergent builder and water conditioner\/chelator. The water-based formulation makes it easily dispersible in water, with little mixing energy required. ProDyne acts as a water conditioner in hard or mineral-laden water, and water wets downhole equipment such as rods and tooling, ultimately contributing to longer tooling and rod life, and lower drilling temperatures.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eSoftens hard water for polymers, leading to faster hydration\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eNon-foaming\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eKeeps drill bit clean of debris by reducing the “stickiness” of clay materials and cuttings\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eCan be used in conjunction with ProAction’s ProBore or ProVis Series, along with other brands of bentonite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I always need to use ProDyne when running ProDrill?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, ProDyne is necessary when low density, sticky soil material that wants to cling to rods and tooling is present, and in projects that might have been “water only” traditionally, can be a great low-cost additive to increase productivity and efficiency. ProDyne is compatible with all ProAction products so it can be run as needed with any ProAction mud mix—ProBore or ProVis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan ProDyne be used to create a foam?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, ProDyne is non-foaming. Contact your local distributor for information on ProAction Fluids’ ProFoam product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill ProDyne freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProDyne will turn to slush at temperatures below 20°F (-7°C). This does not affect the performance, and it will fully activate when introduced into a fluid system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 EZB (Bag or Bottle) treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eProDyne is a great supplemental additive for any soil condition, even sand or rock. The ability to keep tooling clean leads to more efficient drilling by keeping cutting surfaces exposed, tooling cool, and rods free of organic material that would have a negative effect on rotational torque. Use it to achieve full hydration of ProAction polymer products such as ProDrill or GeoSweep HD.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf starting with an empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill tank with water to roughly half of desired capacity\u003c\/li\u003e\n\u003cli\u003eAdd ProDyne through the top of the tank. The energy of the water filling the tank will be sufficient for agitation and mixing of the product.\u003c\/li\u003e\n\u003cli\u003eMix the tank for 2-3 minutes to ensure full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eIf adding into a tank already filled to target capacity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the fluid in your tank is moving either via pump or mixing jets\u003c\/li\u003e\n\u003cli\u003eAdd ProDyne through the top of the tank\u003c\/li\u003e\n\u003cli\u003eMix the tank for 2-3 minutes to ensure full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProDyne-Product-and-Mixing-v1.2.pdf?v=1777553620\"\u003eProDyne Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.pe-energy.com\/wp-content\/uploads\/2026\/04\/ProDyne_US_US_EN_3.0.pdf\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 10 EZ Bottles","offer_id":54066302288177,"sku":"5305-10-RB","price":72.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54066302320945,"sku":"5305-5","price":67.04,"currency_code":"USD","in_stock":false},{"title":"265 Gallon IBC Tote","offer_id":54066302353713,"sku":"5305-265","price":2250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-ProDyne.jpg?v=1777554060"},{"product_id":"proaction-fluids-prodrill-eco-water-based-petroleum-distillate-free-soil-stabilizer-and-viscosifier","title":"ProAction Fluids ProDrill Eco Water-Based Petroleum \/ Distillate Free Soil Stabilizer and Viscosifier","description":"\u003cdiv class=\"elementor-element elementor-element-77b3d10c elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"77b3d10c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eProDrill Eco is a proprietary water-based polymer blend that binds to clay and other low-density solids, leading to the removal of cuttings from a bore path. ProDrill Eco has no oil or hydrocarbons, providing an alternative to ProDrill in projects that have restrictions for products with oil-based or hydrocarbon-containing carrier fluids.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-e24d4e9 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"e24d4e9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater-based carrier fluid\u003c\/li\u003e\n\u003cli\u003eHydrates Rapidly\u003c\/li\u003e\n\u003cli\u003eProvides alternative to ProDrill for projects with limitations on products containing hydrocarbons\u003c\/li\u003e\n\u003cli\u003eCan be used in conjunction with ProAction’s ProBore or ProVis series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes ProDrill Eco have any oil or hydrocarbons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. ProDrill Eco is 100% oil and hydrocarbon free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs ProDrill Eco able to be used with ClayLock and ProDyne in the same mud blend? \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. ProDrill Eco is compatible with all ProAction products, and can be used just like ProDrill in clay mixes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill ProDrill Eco freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. ProDrill Eco freezes at 32 degrees.  It will thaw back out and is still usable, even after freezing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan ProDrill Eco be added to a bentonite-based mix?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProAction’s recommendation for clay and other low density soils is to utilize ProDrill or ProDrill Eco as your base fluid, and add other supplemental additives such as ProDyne and ClayLock as needed. In high density soils where a ProVis series or other Bentonite product is desired, ProDrill Eco can be used to modulate the carrying capacity of a bentonite based drilling fluid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 EZB (Bag or Bottle) treats 500 gallons\u003c\/p\u003e\n\u003cp\u003eProDrill Eco is a water-based alternative to ProDrill and can be utilized as a 1:1 replacement. ProDrill Eco’s viscosity will be less than that of a normal ProDrill mix, and it will be unaffected by pH (safe operating range between pH levels of 5-10). The water carrier leads to rapid dispersion and hydration, with less interference from mineral-laden or hard water.\u003c\/p\u003e\n\u003cp\u003eIf starting with an empty tank:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill tank with water to roughly half of desired capacity\u003c\/li\u003e\n\u003cli\u003eAdd ProDrill Eco through the top of the tank. The energy of the water filling the tank will be sufficient for the agitation and mixing of the product.\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf adding into a tank already filled to target capacity:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTank fluid must be moving either via pump or mixing jets\u003c\/li\u003e\n\u003cli\u003eAdd ProDrill Eco through the top of the tank\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full dissolution\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProDrill-Eco-Product-and-Mixing-v1.0.pdf?v=1777556391\" title=\"ProDrill-Eco-Product-and-Mixing\"\u003eProDrill Eco Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProDrill-ECO_US_US_EN_1.0.pdf?v=1777556390\" title=\"ProDrill-ECO\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 10 EZ Bottles","offer_id":54066575311153,"sku":"5325-10-RB","price":205.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54066575343921,"sku":"5325-5","price":187.0,"currency_code":"USD","in_stock":true},{"title":"265 Gallon IBC Tote","offer_id":54066575376689,"sku":"5325-265","price":6806.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-ProDrill-Eco-Water-Based-Petroleum.jpg?v=1777556490"},{"product_id":"proaction-fluids-prodrill-soil-stabilizer-and-viscosifier","title":"ProAction Fluids ProDrill Soil Stabilizer and Viscosifier","description":"\u003cdiv class=\"elementor-element elementor-element-a0a0eeb elementor-widget elementor-widget-heading ce-animation-start\" data-id=\"a0a0eeb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003eProDrill is an anionic, multi-polymer blend formulated to build viscosity and bind to clay and other low density solids, providing efficient removal from a bore hole. ProDrill’s composition offers a high affinity to clay, providing a slick bore hole and smooth, creamy, cuttings consistency. ProDrill also works as a fluid on pipe friction reducer, leading to lower fluid pump pressures and increased pump life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-51143cc0 elementor-widget elementor-widget-text-editor ce-animation-start\" data-id=\"51143cc0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cp\u003e\u003cstrong\u003ePRIMARY BENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRapid hydration\u003c\/li\u003e\n\u003cli\u003eDecreased pressures\u003c\/li\u003e\n\u003cli\u003eHigh cuttings content on returns\u003c\/li\u003e\n\u003cli\u003e Reduced cleanup time\u003c\/li\u003e\n\u003cli\u003eIn addition to being base of ProBore series, can be used in conjunction with ProVis Bentonite and other bentonite-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ’s\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan ProDrill replace bentonite clay?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn soils that are composed primarily of clay as determined by a jar test, ProDrill can be a direct replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs ProDrill compatible with Bentonite?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProAction’s recommendation for clay and other low density soils is to utilize ProDrill as your base fluid, and add other supplemental additives such as ProDyne and ClayLock as needed. In high density soils where a ProVis series or other Bentonite product is desired, low doses of ProDrill can be used to modulate the viscosity and carrying capacity. ProDrill’s high affinity for clay makes it extremely potent in bentonite mixes, and ProAction recommends capping dosage at 1\/2 EZB (.25 gallon) per 500 gallons of water for those specific circumstances.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill ProDrill freeze?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. ProDrill will become more viscous in cooler temperatures, but will not freeze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 EZB (Bag or Bottle) treats 500\u003c\/p\u003e\n\u003cp\u003eProDrill  is best suited for clay and silt soil conditions, and the mixing chart below shows the dosages needed for the various soil types. ProDrill is relatively unaffected by pH (safe operating range is between pH 5-10). However, ProDrill hydration can be affected by hard or mineral-laden water. ProDyne is recommended to run in conjunction with ProDrill  to ensure consistent results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf starting with an empty tank:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFill tank with water to the desired capacity\u003c\/li\u003e\n\u003cli\u003eAdd ProDrill through the top of the tank. The energy of the water filling the tank will be sufficient for agitation and mixing of the product.\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full hydration\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eIf adding into a tank already filled to target capacity:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTank fluid must be moving either via pump or mixing jets\u003c\/li\u003e\n\u003cli\u003eAdd ProDrill through the top of the tank\u003c\/li\u003e\n\u003cli\u003eMix tank for 2-3 minutes for full hydration\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProDrill-Product-and-Mixing-v1.2.pdf?v=1777557600\" title=\"ProDrill-Product-and-Mixing\"\u003eProDrill Product\/Mixing Guide\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProDrill_US_US_EN_1.1.pdf?v=1777557600\" title=\"ProDrill\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"ProAction Fluids","offers":[{"title":"Case of 10 EZ Bottles","offer_id":54066614862129,"sku":"5306-10-RB","price":125.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon Bucket","offer_id":54066614894897,"sku":"5306-5","price":113.77,"currency_code":"USD","in_stock":true},{"title":"265 Gallon IBC Tote","offer_id":54066614927665,"sku":"5306-265","price":4150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/files\/ProAction-Fluids-ProDrill-Soil-Stabilizer-and-Viscosifier.jpg?v=1777557967"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1893\/collections\/proaction-fluids_1.jpg?v=1791792949","url":"https:\/\/www.industrialstop.com\/collections\/proaction-fluids.oembed","provider":"IndustrialStop","version":"1.0","type":"link"}